Not ready for a consult yet? Learn more

Homebuyers Toolkit is for you if...
So it’s important that you know that a Building Inspector will only give you snap shot of what needs fixing today, based on a simple list of visible defects.
Same tick-box checklist for every home
Short course training (3 day min)
Unregulated inspection industry
Cannot get you get you out of a contract for major defects
Not qualified to diagnose structural risk or repair costs
Inspection report = simple list of visible defects
While a Building Engineer can give you an expert diagnosis of risks and costs so that you’re in control of what happens in the future.
Foundation movement
Roof and wall structural failure
Termite risk and wet area leak detection
Stormwater drainage and moisture issues
Retaining wall movement and unstable slope conditions
Planning issues related to renovations
When things go wrong, homeowners and insurers don’t call Building Inspectors, they call Engineers like us to investigate.
Hidden Repair Cost:
$25,000 - $80,000
Not covered by insurance. Missed by building inspectors.
Foundation Underpinning & Drainage
Structural Building Movement (Eltham VIC)
On-site inspection (we inspect for 2-3hrs, where inspectors average 1hr)
Building defect catalogue (AS4349.1 - visible defects)
Moisture readings (visible leak detection)
Thermal imagery (heat & moisture patterns)
Structural building assessment (registered building engineer)
Foundation & floor monitoring (digital level survey, footing assessment)
Timber framing assessment (sag, loads, alterations)
Site & drainage classification (civil engineering assessment)
Roof drainage & condition imagery (drone imagery)
Specialist referrals (incl. to licensed timber pest & building professionals)
Land & planning report (zoning, overlays, easements)
Cost guidance & risk assessment (repair & maintenance cost ranges)
Renovation feasibility advice (preliminary options review)
Post-inspection debrief meeting (engineer walk-through of all the findings)
On-demand phone support (get your questions answered, even after moving in)
And if your first offer falls through,
we will review your next home for free!
Our Building Engineer Report includes a full Pre-Purchase Building Inspection plus a lot more. You’re not paying extra; you’re just getting more.
If a major defect is found, only a Registered Building Engineer or Practitioner is qualified to get you out of the contract of sale. If we find something serious, we’ll break it down for you in plain English. We will work with you for as long as it takes, to ensure that you are confident with the next steps.
We’re typically on-site for 2-3 hours, depending on property size. You’ll receive a full written report with findings, photos, and recommendations within 1-2 days. Faster turnaround time can be arranged if needed.
Our background is in forensic engineering, structural design and consulting. Unlike building inspectors, we can diagnose the root cause of issues and give you a plan for the future. You’re not just getting an opinion; you’re getting an expert evaluation from chartered professional engineers.
We specialise in established residential homes. No apartments or high-rises. We service Melbourne suburbs from Greensborough and Eltham through Heidelberg, Kew, Balwyn, Box Hill and Doncaster, across to Ringwood, Croydon and Glen Waverley, and down to Brighton and Cheltenham. We also service Geelong, Bayside and Mornington Peninsula.
Absolutely. We don’t leave you with just a report, we include a 1-on-1 phone debrief to answer your questions and guide your next steps. We are committed to helping you get into your new home, and even check in after you have settled in.
Feel free to book a call with Chris. You can also contact us at [email protected] or call us on 0402 885 855 for questions, quotes or advice.
We never share your details with third parties.
Chris Dafter (Founder, Homebuyers Toolkit)
Chartered Engineer (MIEAust, CPEng, NER)
Registered Building Practitioner (RBP, RPEng)
For over a decade, I was a forensic, structural and civil engineer.
I inspected thousands of Melbourne homes under major insurance claims. And I saw the same gut-wrenching scene again and again. Families stressed out and facing massive repair bills (typically $40,000 to $150,000+)! Why? Because nearly every claim I investigated was rejected by the insurer as “pre-existing damage.” No cover and no help.
I was always called in too late. Most families in trouble, had done everything “right” and hired a standard pre-purchase building inspection.
But those fast, cheap checklist reports miss the critical issues. Like structural problems, foundation movement, or the things that cause the big expensive failures. I saw the unfair playing field clearly: insurers protect themselves by sending chartered engineers to fight claims, whilst homebuyers get sent in with a checklist. That never sat right with me.
So I walked away from the insurance work and built something different.
A comprehensive pre-purchase building service that puts homebuyers on the same footing as the insurers, before the contract is signed.
Our team are Chartered Professional Engineers and Registered Building Practitioners.
We work for homebuyers, not Real Estate Agents or Vendors. Our job is to give you the facts to avoid the lemon, negotiate with confidence and never end up in a "pre-existing, not covered" fight with your insurer. We tell you what’s really going on and what it will cost, then give you a clear plan for exactly what to do next.
Chartered Professional Engineer
National Engineers Register Link
Registered Building Practitioner
Business Licensing Authority Link
Professional Indemnity Insured
Australian Business Register Link
Director Engineering Consultant
Chris' Professional History Linkedin